qmk/tmk_core/common/chibios/eeprom.c

#include "ch.h"
#include "hal.h"

#include "eeconfig.h"

/*************************************/
/*          Hardware backend         */
/*                                   */
/*    Code from PJRC/Teensyduino     */
/*************************************/

/* Teensyduino Core Library
 * http://www.pjrc.com/teensy/
 * Copyright (c) 2013 PJRC.COM, LLC.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * 1. The above copyright notice and this permission notice shall be 
 * included in all copies or substantial portions of the Software.
 *
 * 2. If the Software is incorporated into a build system that allows 
 * selection among a list of target devices, then similar target
 * devices manufactured by PJRC.COM must be included in the list of
 * target devices and selectable in the same manner.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */


#if defined(K20x) /* chip selection */
/* Teensy 3.0, 3.1, 3.2; mchck; infinity keyboard */

// The EEPROM is really RAM with a hardware-based backup system to
// flash memory.  Selecting a smaller size EEPROM allows more wear
// leveling, for higher write endurance.  If you edit this file,
// set this to the smallest size your application can use.  Also,
// due to Freescale's implementation, writing 16 or 32 bit words
// (aligned to 2 or 4 byte boundaries) has twice the endurance
// compared to writing 8 bit bytes.
//
#define EEPROM_SIZE 32

// Writing unaligned 16 or 32 bit data is handled automatically when
// this is defined, but at a cost of extra code size.  Without this,
// any unaligned write will cause a hard fault exception!  If you're
// absolutely sure all 16 and 32 bit writes will be aligned, you can
// remove the extra unnecessary code.
//
#define HANDLE_UNALIGNED_WRITES

// Minimum EEPROM Endurance
// ------------------------
#if (EEPROM_SIZE == 2048)	// 35000 writes/byte or 70000 writes/word
  #define EEESIZE 0x33
#elif (EEPROM_SIZE == 1024)	// 75000 writes/byte or 150000 writes/word
  #define EEESIZE 0x34
#elif (EEPROM_SIZE == 512)	// 155000 writes/byte or 310000 writes/word
  #define EEESIZE 0x35
#elif (EEPROM_SIZE == 256)	// 315000 writes/byte or 630000 writes/word
  #define EEESIZE 0x36
#elif (EEPROM_SIZE == 128)	// 635000 writes/byte or 1270000 writes/word
  #define EEESIZE 0x37
#elif (EEPROM_SIZE == 64)	// 1275000 writes/byte or 2550000 writes/word
  #define EEESIZE 0x38
#elif (EEPROM_SIZE == 32)	// 2555000 writes/byte or 5110000 writes/word
  #define EEESIZE 0x39
#endif

void eeprom_initialize(void)
{
	uint32_t count=0;
	uint16_t do_flash_cmd[] = {
		0xf06f, 0x037f, 0x7003, 0x7803,
		0xf013, 0x0f80, 0xd0fb, 0x4770};
	uint8_t status;

	if (FTFL->FCNFG & FTFL_FCNFG_RAMRDY) {
		// FlexRAM is configured as traditional RAM
		// We need to reconfigure for EEPROM usage
		FTFL->FCCOB0 = 0x80; // PGMPART = Program Partition Command
		FTFL->FCCOB4 = EEESIZE; // EEPROM Size
		FTFL->FCCOB5 = 0x03; // 0K for Dataflash, 32K for EEPROM backup
		__disable_irq();
		// do_flash_cmd() must execute from RAM.  Luckily the C syntax is simple...
		(*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFL->FSTAT));
		__enable_irq();
		status = FTFL->FSTAT;
		if (status & (FTFL_FSTAT_RDCOLERR|FTFL_FSTAT_ACCERR|FTFL_FSTAT_FPVIOL)) {
			FTFL->FSTAT = (status & (FTFL_FSTAT_RDCOLERR|FTFL_FSTAT_ACCERR|FTFL_FSTAT_FPVIOL));
			return; // error
		}
	}
	// wait for eeprom to become ready (is this really necessary?)
	while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) {
		if (++count > 20000) break;
	}
}

#define FlexRAM ((uint8_t *)0x14000000)

uint8_t eeprom_read_byte(const uint8_t *addr)
{
	uint32_t offset = (uint32_t)addr;
	if (offset >= EEPROM_SIZE) return 0;
	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
	return FlexRAM[offset];
}

uint16_t eeprom_read_word(const uint16_t *addr)
{
	uint32_t offset = (uint32_t)addr;
	if (offset >= EEPROM_SIZE-1) return 0;
	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
	return *(uint16_t *)(&FlexRAM[offset]);
}

uint32_t eeprom_read_dword(const uint32_t *addr)
{
	uint32_t offset = (uint32_t)addr;
	if (offset >= EEPROM_SIZE-3) return 0;
	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
	return *(uint32_t *)(&FlexRAM[offset]);
}

void eeprom_read_block(void *buf, const void *addr, uint32_t len)
{
	uint32_t offset = (uint32_t)addr;
	uint8_t *dest = (uint8_t *)buf;
	uint32_t end = offset + len;
	
	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
	if (end > EEPROM_SIZE) end = EEPROM_SIZE;
	while (offset < end) {
		*dest++ = FlexRAM[offset++];
	}
}

int eeprom_is_ready(void)
{
	return (FTFL->FCNFG & FTFL_FCNFG_EEERDY) ? 1 : 0;
}

static void flexram_wait(void)
{
	while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) {
		// TODO: timeout
	}
}

void eeprom_write_byte(uint8_t *addr, uint8_t value)
{
	uint32_t offset = (uint32_t)addr;

	if (offset >= EEPROM_SIZE) return;
	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
	if (FlexRAM[offset] != value) {
		FlexRAM[offset] = value;
		flexram_wait();
	}
}

void eeprom_write_word(uint16_t *addr, uint16_t value)
{
	uint32_t offset = (uint32_t)addr;

	if (offset >= EEPROM_SIZE-1) return;
	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
#ifdef HANDLE_UNALIGNED_WRITES
	if ((offset & 1) == 0) {
#endif
		if (*(uint16_t *)(&FlexRAM[offset]) != value) {
			*(uint16_t *)(&FlexRAM[offset]) = value;
			flexram_wait();
		}
#ifdef HANDLE_UNALIGNED_WRITES
	} else {
		if (FlexRAM[offset] != value) {
			FlexRAM[offset] = value;
			flexram_wait();
		}
		if (FlexRAM[offset + 1] != (value >> 8)) {
			FlexRAM[offset + 1] = value >> 8;
			flexram_wait();
		}
	}
#endif
}

void eeprom_write_dword(uint32_t *addr, uint32_t value)
{
	uint32_t offset = (uint32_t)addr;

	if (offset >= EEPROM_SIZE-3) return;
	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
#ifdef HANDLE_UNALIGNED_WRITES
	switch (offset & 3) {
	case 0:
#endif
		if (*(uint32_t *)(&FlexRAM[offset]) != value) {
			*(uint32_t *)(&FlexRAM[offset]) = value;
			flexram_wait();
		}
		return;
#ifdef HANDLE_UNALIGNED_WRITES
	case 2:
		if (*(uint16_t *)(&FlexRAM[offset]) != value) {
			*(uint16_t *)(&FlexRAM[offset]) = value;
			flexram_wait();
		}
		if (*(uint16_t *)(&FlexRAM[offset + 2]) != (value >> 16)) {
			*(uint16_t *)(&FlexRAM[offset + 2]) = value >> 16;
			flexram_wait();
		}
		return;
	default:
		if (FlexRAM[offset] != value) {
			FlexRAM[offset] = value;
			flexram_wait();
		}
		if (*(uint16_t *)(&FlexRAM[offset + 1]) != (value >> 8)) {
			*(uint16_t *)(&FlexRAM[offset + 1]) = value >> 8;
			flexram_wait();
		}
		if (FlexRAM[offset + 3] != (value >> 24)) {
			FlexRAM[offset + 3] = value >> 24;
			flexram_wait();
		}
	}
#endif
}

void eeprom_write_block(const void *buf, void *addr, uint32_t len)
{
	uint32_t offset = (uint32_t)addr;
	const uint8_t *src = (const uint8_t *)buf;

	if (offset >= EEPROM_SIZE) return;
	if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize();
	if (len >= EEPROM_SIZE) len = EEPROM_SIZE;
	if (offset + len >= EEPROM_SIZE) len = EEPROM_SIZE - offset;
	while (len > 0) {
		uint32_t lsb = offset & 3;
		if (lsb == 0 && len >= 4) {
			// write aligned 32 bits
			uint32_t val32;
			val32 = *src++;
			val32 |= (*src++ << 8);
			val32 |= (*src++ << 16);
			val32 |= (*src++ << 24);
			if (*(uint32_t *)(&FlexRAM[offset]) != val32) {
				*(uint32_t *)(&FlexRAM[offset]) = val32;
				flexram_wait();
			}
			offset += 4;
			len -= 4;
		} else if ((lsb == 0 || lsb == 2) && len >= 2) {
			// write aligned 16 bits
			uint16_t val16;
			val16 = *src++;
			val16 |= (*src++ << 8);
			if (*(uint16_t *)(&FlexRAM[offset]) != val16) {
				*(uint16_t *)(&FlexRAM[offset]) = val16;
				flexram_wait();
			}
			offset += 2;
			len -= 2;
		} else {
			// write 8 bits
			uint8_t val8 = *src++;
			if (FlexRAM[offset] != val8) {
				FlexRAM[offset] = val8;
				flexram_wait();
			}
			offset++;
			len--;
		}
	}
}

/*
void do_flash_cmd(volatile uint8_t *fstat)
{
	*fstat = 0x80;
	while ((*fstat & 0x80) == 0) ; // wait
}
00000000 <do_flash_cmd>:
   0:	f06f 037f 	mvn.w	r3, #127	; 0x7f
   4:	7003      	strb	r3, [r0, #0]
   6:	7803      	ldrb	r3, [r0, #0]
   8:	f013 0f80 	tst.w	r3, #128	; 0x80
   c:	d0fb      	beq.n	6 <do_flash_cmd+0x6>
   e:	4770      	bx	lr
*/

#elif defined(KL2x) /* chip selection */
/* Teensy LC (emulated) */

#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))

extern uint32_t __eeprom_workarea_start__;
extern uint32_t __eeprom_workarea_end__;

#define EEPROM_SIZE 128

static uint32_t flashend = 0;

void eeprom_initialize(void)
{
	const uint16_t *p = (uint16_t *)SYMVAL(__eeprom_workarea_start__);

	do {
		if (*p++ == 0xFFFF) {
			flashend = (uint32_t)(p - 2);
			return;
		}
	} while (p < (uint16_t *)SYMVAL(__eeprom_workarea_end__));
	flashend = (uint32_t)((uint16_t *)SYMVAL(__eeprom_workarea_end__) - 1);
}

uint8_t eeprom_read_byte(const uint8_t *addr)
{
	uint32_t offset = (uint32_t)addr;
	const uint16_t *p = (uint16_t *)SYMVAL(__eeprom_workarea_start__);
	const uint16_t *end = (const uint16_t *)((uint32_t)flashend);
	uint16_t val;
	uint8_t data=0xFF;

	if (!end) {
		eeprom_initialize();
		end = (const uint16_t *)((uint32_t)flashend);
	}
	if (offset < EEPROM_SIZE) {
		while (p <= end) {
			val = *p++;
			if ((val & 255) == offset) data = val >> 8;
		}
	}
	return data;
}

static void flash_write(const uint16_t *code, uint32_t addr, uint32_t data)
{
	// with great power comes great responsibility....
	uint32_t stat;
	*(uint32_t *)&(FTFA->FCCOB3) = 0x06000000 | (addr & 0x00FFFFFC);
	*(uint32_t *)&(FTFA->FCCOB7) = data;
	__disable_irq();
	(*((void (*)(volatile uint8_t *))((uint32_t)code | 1)))(&(FTFA->FSTAT));
	__enable_irq();
	stat = FTFA->FSTAT & (FTFA_FSTAT_RDCOLERR|FTFA_FSTAT_ACCERR|FTFA_FSTAT_FPVIOL);
	if (stat) {
		FTFA->FSTAT = stat;
	}
	MCM->PLACR |= MCM_PLACR_CFCC;
}

void eeprom_write_byte(uint8_t *addr, uint8_t data)
{
	uint32_t offset = (uint32_t)addr;
	const uint16_t *p, *end = (const uint16_t *)((uint32_t)flashend);
	uint32_t i, val, flashaddr;
	uint16_t do_flash_cmd[] = {
		0x2380, 0x7003, 0x7803, 0xb25b, 0x2b00, 0xdafb, 0x4770};
	uint8_t buf[EEPROM_SIZE];

	if (offset >= EEPROM_SIZE) return;
	if (!end) {
		eeprom_initialize();
		end = (const uint16_t *)((uint32_t)flashend);
	}
	if (++end < (uint16_t *)SYMVAL(__eeprom_workarea_end__)) {
		val = (data << 8) | offset;
		flashaddr = (uint32_t)end;
		flashend = flashaddr;
		if ((flashaddr & 2) == 0) {
			val |= 0xFFFF0000;
		} else {
			val <<= 16;
			val |= 0x0000FFFF;
		}
		flash_write(do_flash_cmd, flashaddr, val);
	} else {
		for (i=0; i < EEPROM_SIZE; i++) {
			buf[i] = 0xFF;
		}
		val = 0;
		for (p = (uint16_t *)SYMVAL(__eeprom_workarea_start__); p < (uint16_t *)SYMVAL(__eeprom_workarea_end__); p++) {
			val = *p;
			if ((val & 255) < EEPROM_SIZE) {
				buf[val & 255] = val >> 8;
			}
		}
		buf[offset] = data;
		for (flashaddr=(uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_start__); flashaddr < (uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_end__); flashaddr += 1024) {
			*(uint32_t *)&(FTFA->FCCOB3) = 0x09000000 | flashaddr;
			__disable_irq();
			(*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFA->FSTAT));
			__enable_irq();
			val = FTFA->FSTAT & (FTFA_FSTAT_RDCOLERR|FTFA_FSTAT_ACCERR|FTFA_FSTAT_FPVIOL);;
			if (val) FTFA->FSTAT = val;
			MCM->PLACR |= MCM_PLACR_CFCC;
		}
		flashaddr=(uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_start__);
		for (i=0; i < EEPROM_SIZE; i++) {
			if (buf[i] == 0xFF) continue;
			if ((flashaddr & 2) == 0) {
				val = (buf[i] << 8) | i;
			} else {
				val = val | (buf[i] << 24) | (i << 16);
				flash_write(do_flash_cmd, flashaddr, val);
			}
			flashaddr += 2;
		}
		flashend = flashaddr;
		if ((flashaddr & 2)) {
			val |= 0xFFFF0000;
			flash_write(do_flash_cmd, flashaddr, val);
		}
	}
}

/*
void do_flash_cmd(volatile uint8_t *fstat)
{
        *fstat = 0x80;
        while ((*fstat & 0x80) == 0) ; // wait
}
00000000 <do_flash_cmd>:
   0:	2380      	movs	r3, #128	; 0x80
   2:	7003      	strb	r3, [r0, #0]
   4:	7803      	ldrb	r3, [r0, #0]
   6:	b25b      	sxtb	r3, r3
   8:	2b00      	cmp	r3, #0
   a:	dafb      	bge.n	4 <do_flash_cmd+0x4>
   c:	4770      	bx	lr
*/


uint16_t eeprom_read_word(const uint16_t *addr)
{
	const uint8_t *p = (const uint8_t *)addr;
	return eeprom_read_byte(p) | (eeprom_read_byte(p+1) << 8);
}

uint32_t eeprom_read_dword(const uint32_t *addr)
{
	const uint8_t *p = (const uint8_t *)addr;
	return eeprom_read_byte(p) | (eeprom_read_byte(p+1) << 8)
		| (eeprom_read_byte(p+2) << 16) | (eeprom_read_byte(p+3) << 24);
}

void eeprom_read_block(void *buf, const void *addr, uint32_t len)
{
	const uint8_t *p = (const uint8_t *)addr;
	uint8_t *dest = (uint8_t *)buf;
	while (len--) {
		*dest++ = eeprom_read_byte(p++);
	}
}

int eeprom_is_ready(void)
{
	return 1;
}

void eeprom_write_word(uint16_t *addr, uint16_t value)
{
	uint8_t *p = (uint8_t *)addr;
	eeprom_write_byte(p++, value);
	eeprom_write_byte(p, value >> 8);
}

void eeprom_write_dword(uint32_t *addr, uint32_t value)
{
	uint8_t *p = (uint8_t *)addr;
	eeprom_write_byte(p++, value);
	eeprom_write_byte(p++, value >> 8);
	eeprom_write_byte(p++, value >> 16);
	eeprom_write_byte(p, value >> 24);
}

void eeprom_write_block(const void *buf, void *addr, uint32_t len)
{
	uint8_t *p = (uint8_t *)addr;
	const uint8_t *src = (const uint8_t *)buf;
	while (len--) {
		eeprom_write_byte(p++, *src++);
	}
}

#else
// No EEPROM supported, so emulate it

#define EEPROM_SIZE 32
static uint8_t buffer[EEPROM_SIZE];

uint8_t eeprom_read_byte(const uint8_t *addr) {
	uint32_t offset = (uint32_t)addr;
	return buffer[offset];
}

void eeprom_write_byte(uint8_t *addr, uint8_t value) {
	uint32_t offset = (uint32_t)addr;
	buffer[offset] = value;
}

uint16_t eeprom_read_word(const uint16_t *addr) {
	const uint8_t *p = (const uint8_t *)addr;
	return eeprom_read_byte(p) | (eeprom_read_byte(p+1) << 8);
}

uint32_t eeprom_read_dword(const uint32_t *addr) {
	const uint8_t *p = (const uint8_t *)addr;
	return eeprom_read_byte(p) | (eeprom_read_byte(p+1) << 8)
		| (eeprom_read_byte(p+2) << 16) | (eeprom_read_byte(p+3) << 24);
}

void eeprom_read_block(void *buf, const void *addr, uint32_t len) {
	const uint8_t *p = (const uint8_t *)addr;
	uint8_t *dest = (uint8_t *)buf;
	while (len--) {
		*dest++ = eeprom_read_byte(p++);
	}
}

void eeprom_write_word(uint16_t *addr, uint16_t value) {
	uint8_t *p = (uint8_t *)addr;
	eeprom_write_byte(p++, value);
	eeprom_write_byte(p, value >> 8);
}

void eeprom_write_dword(uint32_t *addr, uint32_t value) {
	uint8_t *p = (uint8_t *)addr;
	eeprom_write_byte(p++, value);
	eeprom_write_byte(p++, value >> 8);
	eeprom_write_byte(p++, value >> 16);
	eeprom_write_byte(p, value >> 24);
}

void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
	uint8_t *p = (uint8_t *)addr;
	const uint8_t *src = (const uint8_t *)buf;
	while (len--) {
		eeprom_write_byte(p++, *src++);
	}
}

#endif /* chip selection */
// The update functions just calls write for now, but could probably be optimized

void eeprom_update_byte(uint8_t *addr, uint8_t value) {
	eeprom_write_byte(addr, value);
}

void eeprom_update_word(uint16_t *addr, uint16_t value) {
	uint8_t *p = (uint8_t *)addr;
	eeprom_write_byte(p++, value);
	eeprom_write_byte(p, value >> 8);
}

void eeprom_update_dword(uint32_t *addr, uint32_t value) {
	uint8_t *p = (uint8_t *)addr;
	eeprom_write_byte(p++, value);
	eeprom_write_byte(p++, value >> 8);
	eeprom_write_byte(p++, value >> 16);
	eeprom_write_byte(p, value >> 24);
}

void eeprom_update_block(const void *buf, void *addr, uint32_t len) {
	uint8_t *p = (uint8_t *)addr;
	const uint8_t *src = (const uint8_t *)buf;
	while (len--) {
		eeprom_write_byte(p++, *src++);
	}
}