marco/qmk

History

Ryan f3bae56808 Update keycodes for keyboards with RGB Matrix (#24484 )		2024-11-24 12:03:08 +00:00
..
keymaps/default	Update keycodes for keyboards with RGB Matrix (#24484 )	2024-11-24 12:03:08 +00:00
config.h	Migrate RGB Matrix config to info.json - NOPQ (#22866 )	2024-01-10 09:55:09 +00:00
keyboard.json	Migrate split.soft_serial_pin to split.serial.pin O-Z (#24146 )	2024-07-23 12:12:52 +01:00
orthograph.c	WS2812 API rework (#24364 )	2024-10-06 21:01:07 +13:00
readme.md

Orthograph

Split ortho keyboard with RGB backlighting

Keyboard Maintainer: vladkvit
Hardware Supported: Two PCBs + thin Pro Micro compatible boards (Elite C has been extensively tested). Boards with castellated holes (Elite C style) are much easier to install. Maximum thickness is around 3-3.5mm, so a stock Pro Micro (4mm) will not work.
Hardware Availability: https://github.com/vladkvit/orthograph_keyboard for PCB, https://cad.onshape.com/documents/4f736d64448134c948af475a/w/ccab05fd44a7db98ce27216a/e/49ebfb6b27080b9b45bea74a?renderMode=0&uiState=64dd45dbc62cae486db10048 and https://cad.onshape.com/documents/5ff52821d2cb196f3db3d1e8/w/04b7cb21b748da89c8df31e6/e/486b72e32db97b2dfdf00af8 for the hardware

Make example for this keyboard (after setting up your build environment):

qmk compile -kb orthograph -km default

Flashing example for this keyboard: qmk flash -kb orthograph -km default Then, flash EEPROM with handedness (left / right) on both sides.

The reset button is on the underside of each half of the keyboard.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the back of the PCB
Keycode in layout: Press the key mapped to QK_BOOT if it is available