195 lines
6.3 KiB
Markdown
195 lines
6.3 KiB
Markdown
# IS31FL3218 Driver {#is31fl3218-driver}
|
|
|
|
I²C LED driver by Lumissil. Supports up to 18 single-color LEDs, or 6 RGB LEDs.
|
|
|
|
[IS31FL3218 Datasheet](https://www.lumissil.com/assets/pdf/core/IS31FL3218_DS.pdf)
|
|
|
|
## Usage {#usage}
|
|
|
|
The IS31FL3218 driver code is automatically included if you are using the [LED Matrix](../features/led_matrix) or [RGB Matrix](../features/rgb_matrix) feature with the `is31fl3218` driver set, and you would use those APIs instead.
|
|
|
|
However, if you need to use the driver standalone, add this to your `rules.mk`:
|
|
|
|
```make
|
|
COMMON_VPATH += $(DRIVER_PATH)/led/issi
|
|
SRC += is31fl3218-mono.c # For single-color
|
|
SRC += is31fl3218.c # For RGB
|
|
I2C_DRIVER_REQUIRED = yes
|
|
```
|
|
|
|
## Basic Configuration {#basic-configuration}
|
|
|
|
Add the following to your `config.h`:
|
|
|
|
|Define |Default |Description |
|
|
|----------------------------|-------------|---------------------------------------------------|
|
|
|`IS31FL3218_SDB_PIN` |*Not defined*|The GPIO pin connected to the driver's shutdown pin|
|
|
|`IS31FL3218_I2C_TIMEOUT` |`100` |The I²C timeout in milliseconds |
|
|
|`IS31FL3218_I2C_PERSISTENCE`|`0` |The number of times to retry I²C transmissions |
|
|
|
|
### I²C Addressing {#i2c-addressing}
|
|
|
|
The IS31FL3218's 7-bit I²C address is `0x54`, available as `IS31FL3218_I2C_ADDRESS`.
|
|
|
|
## ARM/ChibiOS Configuration {#arm-configuration}
|
|
|
|
Depending on the ChibiOS board configuration, you may need to [enable and configure I²C](i2c#arm-configuration) at the keyboard level.
|
|
|
|
## LED Mapping {#led-mapping}
|
|
|
|
In order to use this driver, each output must be mapped to an LED index, by adding the following to your `<keyboardname>.c`:
|
|
|
|
```c
|
|
const is31fl3218_led_t PROGMEM g_is31fl3218_leds[IS31FL3218_LED_COUNT] = {
|
|
/* R G B */
|
|
{OUT1, OUT2, OUT3},
|
|
// etc...
|
|
};
|
|
```
|
|
|
|
In this example, the red, green and blue channels for the first LED index all have their anodes connected to `VCC`, and their cathodes on the `OUT1`, `OUT2` and `OUT3` pins respectively.
|
|
|
|
For the single-color driver, the principle is the same, but there is only one channel:
|
|
|
|
```c
|
|
const is31fl3218_led_t PROGMEM g_is31fl3218_leds[IS31FL3218_LED_COUNT] = {
|
|
/* V */
|
|
{OUT1},
|
|
// etc...
|
|
};
|
|
```
|
|
|
|
## API {#api}
|
|
|
|
### `struct is31fl3218_led_t` {#api-is31fl3218-led-t}
|
|
|
|
Contains the PWM register addresses for a single RGB LED.
|
|
|
|
#### Members {#api-is31fl3218-led-t-members}
|
|
|
|
- `uint8_t r`
|
|
The output PWM register address for the LED's red channel (RGB driver only).
|
|
- `uint8_t g`
|
|
The output PWM register address for the LED's green channel (RGB driver only).
|
|
- `uint8_t b`
|
|
The output PWM register address for the LED's blue channel (RGB driver only).
|
|
- `uint8_t v`
|
|
The output PWM register address for the LED (single-color driver only).
|
|
|
|
---
|
|
|
|
### `void is31fl3218_init(void)` {#api-is31fl3218-init}
|
|
|
|
Initialize the LED driver. This function should be called first.
|
|
|
|
---
|
|
|
|
### `void is31fl3218_write_register(uint8_t reg, uint8_t data)` {#api-is31fl3218-write-register}
|
|
|
|
Set the value of the given register.
|
|
|
|
#### Arguments {#api-is31fl3218-write-register-arguments}
|
|
|
|
- `uint8_t reg`
|
|
The register address.
|
|
- `uint8_t data`
|
|
The value to set.
|
|
|
|
---
|
|
|
|
### `void is31fl3218_set_color(int index, uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3218-set-color}
|
|
|
|
Set the color of a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3218_update_pwm_buffers()` after you are finished.
|
|
|
|
#### Arguments {#api-is31fl3218-set-color-arguments}
|
|
|
|
- `int index`
|
|
The LED index (ie. the index into the `g_is31fl3218_leds` array).
|
|
- `uint8_t red`
|
|
The red value to set.
|
|
- `uint8_t green`
|
|
The green value to set.
|
|
- `uint8_t blue`
|
|
The blue value to set.
|
|
|
|
---
|
|
|
|
### `void is31fl3218_set_color_all(uint8_t red, uint8_t green, uint8_t blue)` {#api-is31fl3218-set-color-all}
|
|
|
|
Set the color of all LEDs (RGB driver only).
|
|
|
|
#### Arguments {#api-is31fl3218-set-color-all-arguments}
|
|
|
|
- `uint8_t red`
|
|
The red value to set.
|
|
- `uint8_t green`
|
|
The green value to set.
|
|
- `uint8_t blue`
|
|
The blue value to set.
|
|
|
|
---
|
|
|
|
### `void is31fl3218_set_value(int index, uint8_t value)` {#api-is31fl3218-set-value}
|
|
|
|
Set the brightness of a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3218_update_pwm_buffers()` after you are finished.
|
|
|
|
#### Arguments {#api-is31fl3218-set-value-arguments}
|
|
|
|
- `int index`
|
|
The LED index (ie. the index into the `g_is31fl3218_leds` array).
|
|
- `uint8_t value`
|
|
The brightness value to set.
|
|
|
|
---
|
|
|
|
### `void is31fl3218_set_value_all(uint8_t value)` {#api-is31fl3218-set-value-all}
|
|
|
|
Set the brightness of all LEDs (single-color driver only).
|
|
|
|
#### Arguments {#api-is31fl3218-set-value-all-arguments}
|
|
|
|
- `uint8_t value`
|
|
The brightness value to set.
|
|
|
|
---
|
|
|
|
### `void is31fl3218_set_led_control_register(uint8_t index, bool red, bool green, bool blue)` {#api-is31fl3218-set-led-control-register-rgb}
|
|
|
|
Configure the LED control registers for a single LED (RGB driver only). This function does not immediately update the LEDs; call `is31fl3218_update_led_control_registers()` after you are finished.
|
|
|
|
#### Arguments {#api-is31fl3218-set-led-control-register-rgb-arguments}
|
|
|
|
- `uint8_t index`
|
|
The LED index (ie. the index into the `g_is31fl3218_leds` array).
|
|
- `bool red`
|
|
Enable or disable the red channel.
|
|
- `bool green`
|
|
Enable or disable the green channel.
|
|
- `bool blue`
|
|
Enable or disable the blue channel.
|
|
|
|
---
|
|
|
|
### `void is31fl3218_set_led_control_register(uint8_t index, bool value)` {#api-is31fl3218-set-led-control-register-mono}
|
|
|
|
Configure the LED control registers for a single LED (single-color driver only). This function does not immediately update the LEDs; call `is31fl3218_update_led_control_registers()` after you are finished.
|
|
|
|
#### Arguments {#api-is31fl3218-set-led-control-register-mono-arguments}
|
|
|
|
- `uint8_t index`
|
|
The LED index (ie. the index into the `g_is31fl3218_leds` array).
|
|
- `bool value`
|
|
Enable or disable the LED.
|
|
|
|
---
|
|
|
|
### `void is31fl3218_update_pwm_buffers(void)` {#api-is31fl3218-update-pwm-buffers}
|
|
|
|
Flush the PWM values to the LED driver.
|
|
|
|
---
|
|
|
|
### `void is31fl3218_update_led_control_registers(void)` {#api-is31fl3218-update-led-control-registers}
|
|
|
|
Flush the LED control register values to the LED driver.
|